The system can be used for three axis automation equipment, such as dispensing machine, cutting machine, coating machine, nut implanting machine, soldering machine, CNC drilling machine, engraving machines and other equipment.
Without computer field programming, convenient, affordable!
This controller can be arbitrary two axis linkage, linear interpolation and circular interpolation!
Contact: 13510275461, QQ: 611275461 (Ma Sheng): Wang Wang ougisei2007
The need for detailed information, please call or want to contact the shopkeeper!
Product introduction:
1.1 Product Overview
This system is a low cost, high concentration, high degree of integration of the dual Y shaft intelligent screw machine control system designed by the company's professional CNC team for the screw machine industry. With two kinds of blowing screws and screws, widely used in the field of automatic screw machine.
1.2 function profile
1, hand box using high resolution 320*240 color screen, full Chinese interface, easy to use.
2, with automatic blowing screws and automatic screw two working modes;
3, support the workpiece detection and workpiece starting mode;
4, support before the release and pre release mode;
5, support dual working platform and dual boot mode;
6, support failure, or skip mode selection;
7, with a regional array of replication, platform replication, batch editing, single step operation and other functions.
8, action parameters editing is completed, through the serial port to download the action parameters to the controller, you can run offline. Can also be used to save the action parameters to the hand-held box, easy to call;
9, can store hundreds of processing files, each file can support 300 screws, when the use of.
1.3 functional properties
Hardware characteristics of 1.3.1 controller
Motor shaft number: 4 axis (XYZA)
Pulse frequency: 200K
IO port number: eight dedicated inputs (the origin of XYZA, start / pause, pause, reset / emergency stop button), 4 general purpose output I / O (NPN collector open drain output and drive current 1a) for vacuum actuated signal, a power starting signal and the power granted reset signal, alarm output; 2 Road pass with input I / O (active low) for vacuum detection signal, torque detection signal IO input type: optocoupler isolation input.
Storage capacity: 16M
Working voltage: DC 24V
Operating temperature: -10 degrees C -60
Storage temperature: -70 C -40
Working humidity: 40%-80%
Storage humidity: 0%-95%
Hardware characteristics of 1.3.2 handset
Interface mode: equipped with USB interface and serial port, USB port for connecting the computer. Serial port used to connect the hand-held box.
Storage mode: FLASH chip.
Display configuration: resolution 320*240, 3.2 inch color LCD screen.
1.4 list of products:
Hand held box will be equipped with 1 operating teaching box controller will be equipped with 1 motion controller data line will be equipped with 1 connection line
3 axis screw machine control system:
