Full automatic lock screw machine instructions:
1 mainly by the screw automatic transmission system, X-Y-Z mobile platform, control system and lock system components;
2 applicability, replace the product, only need to replace the fixture, equipment kept separate, the corresponding program can be transferred out;
3 feeding using sensor control, the lock to finish a one, automatic feeding, will not repeat the material phenomenon;
4 so do not send material: in lock engineering, the torque is not up to the screw, not sent out, prevent batch mouth have the phenomenon of clamping material;
5 stability is good, not card material, even if bad lead to card material, non professionals can also solve the card in a few seconds;
6 high efficiency, usually 1 seconds to make a screw, do not grab screws, just put the product into the fixture on the operation of equipment;
7 can reduce the 3 workers screw lock operation, automatic production, reduce the labor intensity of workers, improve productivity;
8 key parts of the use of high quality metal materials and special treatment, the original use of imported electronic devices, to ensure that equipment Zero fault.
Automatic lock screw machine efficiency:
Province costs: a single person can operate efficiently, 1 people is equivalent to 3 people's efficiency;
High efficiency: 3600-4000 screws per hour, no waiting time;
More relaxed: a single device requires 1 workers, only to complete the up and down material;
Reliability: configuration wear, floating lock, lock leakage detection and automatic alarm, can work more than 20 hours a day;
Versatility: for products of the same screw lock, only need to replace the fixture, lock of different products, through simple programming, it can be put into production, greatly facilitate the enterprise to organize production.
Screw and screw products to meet certain conditions:
1, screw head D and screw length L ratio: L > 2.5mm D+
2, to play the screw hole in the periphery of the 10mm without obstacles, and the obstacles can not be too high.
3, the surface of the screw hole is a plane or less than 30 degrees inclined plane.
4, screw hole depth is not more than 40mm.
