The selection and detection performance of the fully automatic screw machine, including how to select the non qualified screw and working principle.
First of all, need to understand the different feeding mode, difference detection function. At present, automatic screw machine feeding modes are multi-channel vibration disk and press (patent technology), other basic have been eliminated. At the same time, the feeding method is based on screw, such as small screws that suggest the vibration plate, ordinary suggestion multi-channel recommendation type. Fully automatic screw machine two ways of working are almost the same. Need to sort out the mess of screws, and track the handsome election, and then will be tested.
This paper talks about the automatic screw machine detection performance refers to when the screw through the orbital ordered to blowing and suction inlet, the need to detect by the number of screws, lock pay once, with a single. At this time if the detection performance is not reliable or other problems, it may cause the entire automatic screw machine running stop. If the automatic screw machine a second lock up to 60 or more, there are many errors per tube to send a few, then will cause serious impact. Stable and reliable feeding detection performance is a foundation to ensure the stable and efficient automatic screw machine equipment operation, is not be ignored in the performance.
Of course, usually cases, engineers in the design, has been fully taken into account all, design of the automatic screw machine are the most sophisticated products, and strict product quality detection mechanism. So, these problems will not be automatic screwing manufacture there, please rest assured!
